Creality Ender 3 V3 Plus 3D Printer
By Creality · Budget 3D Printers · 3D Printing
- 300x300x330 mm build volume
- 600 mm/s max speed
- CoreXZ motion system
Lowest price seen
~$339.00 (approx.)
from $339.00 at Amazon
- Amazon ~$339.00 (approx.)View at Amazon
- CrealityView at Creality
- WalmartView at Walmart
- Best BuyView at Best Buy
- eBay (used) eBay: used, open-box, refurbishedView at eBay (used)
- eBayView at eBay
Prices are snapshots. Check the current price with the store.
Summary
A CoreXZ FDM 3D printer with a 300×300×330 mm build volume, rated speeds up to 600 mm/s, and Klipper-based firmware with auto-leveling. All performance figures are manufacturer claims — no independent test data was available at research time.
Strengths
- Large 300×300×330 mm build volume in a CoreXZ frame.
- Klipper-based firmware with input shaping and one-tap auto-leveling.
- Tri-metal quick-swap nozzle with titanium heatbreak reduces heat creep and tool-free changes.
- 60W ceramic hotend rated to 300°C handles PLA through carbon-fiber filaments.
- Die-cast ADC12 aluminum frame with dual Y-axis motors adds rigidity.
- WiFi and Creality Cloud integration for remote printing.
Weaknesses
- The 600 mm/s max speed is a lab figure; Creality itself notes typical speed is 300 mm/s.
- No independent test data confirms the ±0.2 mm accuracy, ≤55 dB noise, or 1000h+ clog-free claims.
- ABS and other high-temp filaments require an enclosure that is not included.
- WiFi band support (2.4 GHz vs 5 GHz) is not specified by the manufacturer.
- No owner feedback from Reddit or forums was accessible during research.
- Long-term reliability data and failure-rate statistics are unavailable.
Verified specifications
| Build volume | 300×300×330 mm. |
|---|---|
| Dimensions | 410×445×577 mm (W×D×H); 11.5 kg. |
| Printing speed | up to 600 mm/s; Creality notes typical speed is 300 mm/s. |
| Acceleration | up to 20,000 mm/s². |
| Printing accuracy | ±0.2 mm (manufacturer spec). |
| Layer height | 0.1–0.35 mm. |
| Nozzle | 0.4 mm diameter, tri-metal quick-swap “Unicorn” with titanium heatbreak, rated to 300°C. |
| Heatbed | up to 100°C, flexible textured PEI spring steel plate. |
| Hotend | 60W ceramic heater; Creality claims 0–300°C in 75 seconds. |
| Extruder | direct drive with bolster spring and ball plunger; manufacturer claims 1000h+ clog-free extrusion. |
| Frame | ADC12 aluminum alloy die-cast gantry and base. |
| Dual Y-axis motors | 500 mN·m each. |
| Display | HD color touch screen, 800×480 px. |
| Mainboard | 32-bit. |
| Connectivity | WiFi, USB drive, Creality Cloud. WiFi band (2.4 GHz vs 5 GHz) is not specified. |
| Filament | 1.75 mm diameter; supports PLA, TPU (95A), PETG, ABS, PLA-CF, PETG-CF, CR-carbon. |
| File formats | STL, OBJ, 3MF for slicing; G-code for printing. |
| Storage | 8 GB onboard. |
| Firmware | Creality OS (Klipper-based) with input shaping, auto-leveling, OTA updates. Latest listed: V1.2.3.8 (Jun 02, 2024). |
| Power | 350W supply; 100–120V or 200–240V, 50/60Hz auto-switching. |
| Power loss recovery | yes. |
| Filament run-out sensor | yes. |
| Silent mode | ≤55 dB at 1 m (manufacturer lab measurement). |
| Warranty | Creality US store advertises up to 12 months. |
| In the box | tool box, filament spool holder, touch screen. |
| Optional accessories | Nebula Camera (AI failure detection), Creality Space Pi filament dryer, Hyper series filaments, Creality X E3D nozzle. |
Full research notes and sources
Setup and daily use
The CoreXZ motion system and dual Y-axis motors are the main structural upgrades over the standard Ender-3 V3. The die-cast ADC12 aluminum frame is stiffer than typical budget printer frames, which matters at the rated 20,000 mm/s² acceleration. The tri-metal “Unicorn” nozzle with titanium heatbreak is designed for quick swapping and reduced heat creep, though the 1000h+ clog-free extrusion claim is manufacturer lab data without independent verification.
Creality OS is Klipper-based and includes input shaping and auto-leveling with one-tap calibration. The HD color touch screen (800×480 px) handles slicing previews and printer control. WiFi connectivity enables cloud printing through Creality Cloud, and the 8 GB onboard storage holds files locally. The filament run-out sensor and power loss recovery are standard features at this price point.
Running costs, support and warranty
Creality US store lists the Ender-3 V3 Plus at $339 (sale from $479) as of October 2026. A combo bundle with Nebula Camera, nozzle kit, and Hyper PLA×2 is $451.67. The Unicorn Quick-Swap Nozzle Kit alone is $36.85 (sale from $40.94). Filament costs depend on material; the printer supports PLA, TPU, PETG, ABS, and carbon-fiber variants. ABS requires an additional enclosure not included with the printer.
Creality’s US support operates Monday through Friday, 7 AM to 5 PM Pacific Time, via email at cs@creality.com or a ticket system. The store advertises up to 12-month warranty and 14-day returns. Detailed warranty terms require login or serial-number entry on Creality’s warranty page, so exact coverage for US customers is not independently confirmed.
Is it worth it?
At $339 from Creality US direct, the Ender-3 V3 Plus offers a large build volume, CoreXZ kinematics, and Klipper firmware at a competitive price. The absence of independent test data and long-term owner feedback means the manufacturer’s performance claims should be treated as targets rather than confirmed results. At the original $479 price, the value proposition weakens against alternatives with independent verification.
Which model this is
This page covers the Creality Ender-3 V3 Plus CoreXZ 3D Printer, model designation Ender-3 V3 Plus. The US Amazon variant is ASIN B0F8QQZ4QM. The “Plus” refers to the larger 300×300×330 mm build volume compared to the standard Ender-3 V3.
Sources
Manufacturer:
