eSUN eBOX Lite Upgraded 3D Printing Filament Dryer Box
By eSUN · Filament Dryers · 3D Printing
- Size 238104215mm
- Weight 1115g
- Fits 0.5KG and 1KG filament spools
- Supports 1.75mm, 2.85mm and 3.0mm filament diameters
Lowest price seen
$40.99
from $40.99 at eSUN Official Store US (esun3dstore.com) · Checked Oct 2, 2026
- eSUN Official Store US (esun3dstore.com) $40.99View at eSUN Official Store US (esun3dstore.com)
- eSUNView at eSUN
- NeweggView at Newegg
- eBayView at eBay
- eBay (used) eBay: used, open-box, refurbishedView at eBay (used)
- AmazonView at Amazon
Prices are snapshots. Check the current price with the store.
Summary
A low-cost single-spool heated box with a circulation fan and simple temperature and time levels, meant to dry and hold common filament while you print. It is not a high-temperature dryer: eSUN itself warns that the Lite is unsuitable for nylon, PEEK and other engineering filaments, so buy it for PLA, PETG and TPU rather than for everything.
Strengths
- Cheap way to dry and hold PLA, PETG and TPU.
- Owners recover stringy PLA and PETG after several hours or overnight.
- Compact single-spool format with a feed-through path for printing.
- Easy to operate, and one long-term owner reports continued use after repeated cycles.
- No proprietary consumables, so running cost is close to just electricity.
Weaknesses
- Real chamber temperature is limited; owners often measure only the high-40s to low-50s °C even when the heater plate is hotter.
- eSUN says it is not suitable for severely moisture-loaded filament or high-temperature materials such as nylon or PEEK.
- Owners report the lack of an intentional top vent for moist air.
- Buzzing and fan noise are common complaints.
- Fan connectors can come loose if the box is moved, and reseating them is not an official procedure.
- No first-party dimensions, weight or wattage are published.
Verified specifications
| Type | single-spool heated dryer and storage box with a fan-assisted heated chamber. |
|---|---|
| Controls | simple level-based temperature and time settings. |
| Intended use | maintaining and drying common filament during printing, per eSUN. |
| High-temperature filament | eSUN states the Lite is not suitable for nylon or PEEK-class drying. |
| Feed path | enclosure with a feed-through path for printing directly from the box. |
| Consumables | none proprietary; optional desiccant and electricity are the ongoing costs. |
| First-party dimensions, weight and wattage: not published in the official page text reviewed. | |
Full research notes and sources
Temperature and materials
The most important fact comes from eSUN itself: the eBOX Lite is a constant-temperature and humidity aid for printing, not a high-temperature engineering-filament dryer. The official page says the Lite is not suitable for high-temperature drying of nylon or PEEK-class filament. Owner measurements often land around the high-40s to low-50s °C in the chamber even when the heater plate reads hotter, so the level number on the display overstates what the spool actually sees. Older discussions sometimes cite the very high heater-plate temperatures of the original eBOX, but for the Lite the current manufacturer guidance is the one to follow.
Drying common filament
Hands-on comparisons and owner reports agree on the realistic niche: the Lite works better for common materials than for engineering ones. My Tech Fun compared it with the older eBOX across spool capacity, airflow, sponge drying and heater-plate temperature, and GoodPrints3D’s 2026 review concludes it is a reasonable budget dryer for PLA, PETG, TPU and basic moisture recovery but not a strong choice for nylon or engineering filament. Owners report recovering stringy PLA and PETG after several hours or overnight. Drying takes longer because the real chamber temperature is limited, and it depends on venting and the room’s humidity, so the quick fix you might expect from a hotter dryer is not what this is.
Reliability and repair
The design is simple enough that owners have opened the base and reseated loose fan connectors or repaired wiring themselves, though this is not an official user-service procedure. The recurring complaints are buzzing fan noise, limited real air temperature and no dedicated top vent for moist air. If the screen, buttons, fan or heater dies, eSUN’s current FAQ directs you to send the unit back for repair or replacement. There is no published failure rate for the fan or connector issue, so treat it as a known annoyance rather than a certainty.
Which model this is
This page covers the eSUN eBOX Lite, the simpler single-spool dryer and storage box, as distinct from the original eBOX with its different heater and scale features. Buyers who need nylon, PC or consistently high chamber temperatures should choose a hotter dryer instead.
Sources
Manufacturer:
Independent reviews:
Owner reports:
