Eva-Dry E-333 (White Sand)

Eva-Dry E-333 (White Sand)

By Eva-Dry · Dehumidifiers · Home & Workspace

  • Cordless renewable silica gel dehumidifier
  • Absorbs 4-6 oz of moisture, covers up to 333 cu ft
  • Recharges by plugging into an outlet for 8-10 hours
  • No batteries or refills needed
  • Built-in indicator shows when to recharge

Lowest price seen
~$14.97 (approx.)
from $14.97 at Amazon

Prices are snapshots. Check the current price with the store.

Summary

A reusable silica-gel moisture absorber for small closed spaces such as safes, closets, cabinets and storage boxes, with no cord or noise while it works. Its capacity is contested — the 2025 catalog and Home Depot rate it at 4–6 oz per cycle while Eva-Dry’s own page claims up to 13 oz — so size it to a sealed box and plan to unplug it for a 10–12 hour renewal.

Strengths

  • Works silently with no cord during absorption and has no liquid brine cup to spill.
  • The silica beads renew by plugging in, so there are no proprietary refills to buy.
  • A color indicator takes the guesswork out of when to regenerate.
  • Reusable for years on the maker’s claim, and cheap per year if it lasts.
  • A second unit can cover the renewal window in a box you open often.

Weaknesses

  • Capacity is unclear: 4–6 oz per cycle versus the maker’s up-to-13 oz claim.
  • An owner reported 3 of 4 units leaked silica fragments around the fold-out plug.
  • Small capacity: one unit held a 54-qt filament bin near 35% RH, short of the under-20% some owners want.
  • Renewal takes 10–12 hours and releases moisture into the room around the outlet.
  • No fan, tank, switch or setpoint, and the indicator tracks the beads, not room humidity.
  • Home Depot’s listing allows seven days for returns, and Eva-Dry wants unopened goods for its 30-day policy.

Verified specifications

ModelE-333, White Sand; UPC 832856000060.
Absorbentrenewable silica gel with moisture-sensitive indicator beads, orange when ready and green when wet.
Capacity4–6 oz per cycle in Eva-Dry’s 2025 catalog and on Home Depot’s listing; Eva-Dry’s own page claims up to 13 oz.
Coverageup to 333 cubic feet, a nominal small-enclosure rating.
Size6.25 × 1.25 × 4.75 in; about 1 lb 2 oz.
Renewalplug into a 110–120 V outlet for about 10–12 hours in a ventilated area until the beads turn orange.
Monitoringcheck every 4–6 weeks and renew when the beads turn green.
Safetyleave 24–36 in of free space, avoid extension cords, and never heat it longer than 18 hours.
Longevitymaker claims up to 10 years; 5-year limited warranty with registration within 30 days.
Powerno verified wattage; no fan, compressor, tank, switch or humidity setpoint.
Full research notes and sources

How it works and where it fits

The E-333 is a passive desiccant, not a dehumidifier in the compressor sense. Silica gel inside the plastic body takes water vapor out of the air in a closed box, and a window of indicator beads turns from orange to green as they load up. There is no fan, compressor, collection tank, on/off switch or humidity setpoint, so nothing runs and nothing hums while it is absorbing. The maker rates it for up to 333 cubic feet, which is a nominal small-enclosure figure and not a promise against leaks or a door that opens all day.

It suits keeping already-dry things dry: a gun safe, a wardrobe, a boat cabin, a 3D-printer filament box. It is not the tool for a damp wall, a wet basement, a large room, active bathroom humidity or a leak. EPA guidance is to fix the moisture source and keep indoor relative humidity ideally 30–50% and below 60%, which a passive unit cannot do on its own.

Capacity, regeneration and safety

Capacity is the messiest part of this product. Eva-Dry’s 2025 catalog and Home Depot’s exact-model page both say 4–6 oz per cycle, while Eva-Dry’s own product page claims up to 13 oz. No official test protocol resolves the conflict, so treat 4–6 oz as the documented figure and confirm with the maker before relying on 13 oz. The 333 cubic feet coverage is volume, not square feet.

Regeneration means pulling the unit out and unfolding its 110–120 V plug into a wall outlet, usually for 10–12 hours in an open, ventilated spot while the beads dry. The official manual wants 24–36 inches of clearance, no extension cords, no covering, and a hard stop at 18 hours of heating. Check the window every 4–6 weeks and recharge when it turns green. A second unit can stand in while the first dries.

What owners report

The most concrete owner signal is a January 2026 r/Homebrewing report of 3 of 4 E-333 units leaking silica fragments through the fold-out plug area; another owner confirmed it, while a third saw no leakage across E-333 and E-500 units. That is a set of individual reports, not a defect rate. In r/3Dprinting, one owner reported two E-333 units pulling a 20 qt sealed bin from about 45% to 15% RH in 3–4 hours, and another got only about 35% in a 54 qt bin with a single unit against 53% ambient. A 2021 TechWalls tester saw the indicator saturate in about two weeks and renew in about 10 hours, without weighing water or measuring RH precisely.

Running costs and value

There are no refills, cartridges, software or subscriptions, so the recurring cost is $0 a year. Absorption uses no electricity at all; regeneration does, because the plug heats the beads. Eva-Dry publishes no wattage for the E-333, so a real annual energy figure cannot be confirmed. As an illustration only, a hypothetical 20 W heater run for 12 hours and recharged 12 times a year comes to 2.88 kWh, or about $0.72 at an assumed $0.25/kWh; 20 W is not a measured E-333 spec. At the $14.97 Home Depot price, five assumed years would average $2.99 a year before electricity.

On price, Home Depot listed the E-333 at $14.97 in October 2026. Eva-Dry’s own store showed $24.95 but was sold out when checked, Walmart snapshots ran about $23.47–24.95, and Ace Hardware listed $22.99. Home Depot’s larger E-500 is $19.97 with a 6–8 oz claim, and a disposable DampRid FG50T 4 lb bucket is $11.99. Under $15 is good value, $15–19 is fair, and at $20 and up the E-500 is worth comparing unless the smaller body matters.

Which model this is

The E-333 ships as White Sand with UPC 832856000060. It is the small fold-out-plug unit; do not confuse it with the larger E-500 or the powered EDV-1200 electric dehumidifier. None of the internal parts — the silica charge, the indicator beads, the plug and heater — has a separately sold replacement SKU or price, so a damaged unit goes through warranty rather than repair.

Sources

Manufacturer:

Reviews and reference:

Owner reports:

Alternatives and stores:

Buying guides for this category

Related products