FOXBC Flap

By FOXBC · Angle Grinders · Power Tools

  • 4-1/2 inch diameter
  • 60 grit (coarse)
  • Type 29 conical design
  • 7/8 inch arbor (no HUB)
  • Max RPM 13300

Lowest price seen
~$19.99 (approx.)
from $19.99 at Amazon

Prices are snapshots. Check the current price with the store.

Summary

A budget zirconia flap disc for 4-1/2 inch angle grinders, sold in 10-packs for general metal grinding and finishing. No independent test or owner feedback exists for this exact disc, so check the price gap between FOXBC’s site and third-party retailers before you buy.

Strengths

  • Low per-disc cost: about $2.29 direct from FOXBC, about $1.23 from a third-party retailer.
  • 60 grit is the community’s all-purpose midpoint between material removal and finishing.
  • The Type 29 conical profile is the recommended shape for aggressive stock removal and contoured work.
  • Zirconium grain is a common abrasive choice for metal grinding and polishing.
  • Ten discs per pack.

Weaknesses

  • No independent test of this exact disc exists; its performance is unverified.
  • No FOXBC-specific owner feedback was found on Reddit, forums, or retailer Q&A.
  • Durability is unknown; if the discs wear quickly, the low per-disc cost is offset by frequent replacement.
  • The listing does not state backing material, flap count, or whether the discs are balanced.
  • The “up to 10X faster material removal” claim has no published test methodology.
  • The exact product page returned HTTP 429 errors during research, so details were confirmed through the collection page and a third-party listing.

Verified specifications

Diameter4-1/2 inches.
Grit60, coarse.
Type29 conical profile.
Arbor7/8 inch, no hub.
Max RPM13,300.
Abrasivepremium zirconium (zirconia) grain.
Pack size10 discs.
Intended usegrinding and polishing metal and stainless steel — stock removal, shaping, smoothing, blending, beveling, deburring, chamfering, finishing, rust removal.
Standardsmanufacturer claims ANSI and EU European Standards compliance.
Full research notes and sources

Grit, type and what they mean

60 grit is the community’s all-purpose midpoint: coarse enough for stock removal, fine enough to leave a workable surface. The Type 29 conical profile is the shape that guides and r/Welding commenters recommend for aggressive stock removal and contoured work. These are category-level signals, not test results for this disc.

Price and where to buy

FOXBC’s official site lists the 10-pack at $22.99 (checked 2026-10). PlowBoys BBQ, a third-party retailer, lists the same product at $12.25 — about $1.23 a disc against FOXBC’s $2.29. The gap is large enough to be a clearance or a listing error, and this research could not resolve it. Anchor Bermuda carries the adjacent 40 grit Type 29 ceramic variant at $14.25, below FOXBC’s list price for the 60 grit. No historical pricing data was found.

What owners and testers say

No independent test and no FOXBC-specific owner discussion was located for this disc. The FOXBC store-wide review page covers all of the brand’s products, not this SKU. A third-party review aggregator for foxbc.com notes that some users report FOXBC blades dulling slightly faster than premium brands; that covers cutting tools broadly, not flap discs, and it is a weak signal. General flap-disc community consensus supports 60 grit and Type 29 as general-purpose choices, but that is category-level guidance, not a verdict on this specific disc.

Is it worth it?

At the PlowBoys BBQ price of $12.25, the discs are cheap enough to trial for light-to-medium metal grinding, and the low price still limits the downside. At FOXBC’s $22.99 list price, established brands such as DeWalt, 3M and Norton are available at higher but still modest prices, with known performance. Above $23, the value case is weak for an untested abrasive. The key unknown is durability — no data exists to assess it.

Which model this is

This page covers the FOXBC 4-1/2 inch Flap Disc, 60 Grit, Type 29, Premium Zirconium, 10-pack. FOXBC describes itself as a 25-year specialist in wood and metal cutting tools. The “Premium Zirconium” label is shared with the 40 grit variant, and the exact zirconia grade is not disclosed, so match on grit and type before buying. The Amazon listing for this product is ASIN B0FC3P7KBN.

Sources

Manufacturer:

Independent reviews:

  • No independent test of this exact flap disc was located.

Owner reports:

  • No FOXBC-specific owner discussion was located.

Category and community sources:

Retailers:

Related products