Makita 18V LXT Brushless Cordless Quick-Shift Mode 4-Speed Impact Driver (Tool Only) XDT19Z
By Makita · Impact Drivers · Power Tools
- 4-speed power selection up to 3,600 RPM and 3,800 IPM
- Up to 1,590 in-lbs of max fastening torque
- Quick-Shift Mode reduces screw thread strip-out
- Dual LED lights
- 18V LXT platform, bare tool
Price not listed
- MakitaView at Makita
- The Home DepotView at The Home Depot
- Wurth Baer SupplyView at Wurth Baer Supply
- eBay (used) eBay: used, open-box, refurbishedView at eBay (used)
- eBayView at eBay
Prices are snapshots. Check the current price with the store.
Summary
A compact, tool-only 18V impact driver for people already on Makita’s LXT battery platform, with four speed ranges and 1,590 in-lbs of maximum torque. Makita has discontinued it in favor of the XDT20Z, so check parts and service support before you buy.
Strengths
- Four speed ranges plus Quick-Shift and Assist modes suit everything from cabinet screws to self-drilling screws.
- 1,590 in-lbs of torque in a body only 4-1/2 in long.
- Dual ball bearing chuck cuts bit wobble and runout.
- Buying the bare tool avoids paying again for batteries you already own.
- Reverse rotation auto-stop halts the bit once a fastener breaks loose.
Weaknesses
- Makita has discontinued the XDT19Z, so long-term parts and service are uncertain.
- No battery or charger is in the box, so new-platform buyers pay well beyond the tool price.
- One owner reports the 1/4-inch hex quick-release chuck no longer holds bits.
- Owners say the cheaper XDT13Z is the better value for casual DIY work.
- The large mode list is more than some users need.
Verified specifications
| Model | XDT19Z, bare tool only; no battery, charger or case is included. |
|---|---|
| Platform | Makita 18V LXT lithium-ion. |
| Motor | Makita-built brushless. |
| Max torque | 1,590 in-lbs. |
| No-load speed | 0-1,100 / 0-2,100 / 0-3,200 / 0-3,600 RPM across four speeds. |
| Impacts per minute | 0-1,100 / 0-2,600 / 0-3,600 / 0-3,800 IPM. |
| Chuck | 1/4-inch hex, one-touch quick-release, dual ball bearings. |
| Impact mechanism | hardened steel hammer and anvil. |
| Modes | Quick-Shift, Assist Mode and reverse rotation auto-stop, plus Wood, Bolt and two T-modes. |
| LED lights | dual built-in. |
| Fastening capacities | machine screw M4-M8; standard bolt M5-M16; high-tensile bolt M5-M14. |
| Dimensions | 4-1/2 in (114 mm) long. |
| Weight | 2.6-3.3 lbs (1.2-1.5 kg) depending on the battery attached. |
| Compatible batteries | BL1815N through BL1860B. |
| Compatible chargers | DC18RC, DC18RD, DC18RE, DC18SD, DC18SE, DC18SF and DC18SH. |
Full research notes and sources
Modes and controls
Four speed ranges set the pace, and Quick-Shift Mode eases off power as a screw seats to reduce strip-out. Assist Mode starts slow and ramps up to prevent cam-out and cross-threading, and reverse rotation auto-stop stops rotation and impact once a fastener is loose enough. The manual also lists Wood, Bolt and two T-modes for self-drilling screws in thin metal. Dual LED lights sit around the 1/4-inch hex chuck.
Battery, charger and running costs
The XDT19Z ships without a battery or charger, so pair it with an 18V LXT pack from BL1815N through BL1860B and a DC18RC-class charger if you do not already own them. For the tool itself, new old stock has sold for $134.97 on eBay (observed 2026-08-02) and $154.99 open-box at Walmart, while Pacific Power Tools lists a factory-reconditioned XDT19Z-R at $169.99, marked down from $234.00. That is about 27% off.
Discontinued status, parts and warranty
Makita’s official product page marks the XDT19Z as discontinued and points to the XDT20Z as the replacement, so expect new old stock, reconditioned or used inventory. A parts breakdown is published and Makita sells genuine parts through its parts channel, but the company has not said how long it will service the discontinued model. One source lists a 3-year warranty, consistent with Makita’s standard power-tool coverage.
Is it worth it?
For someone already on Makita 18V LXT, this is a fair buy at $134-160; above that, weigh it against the current XDT20Z and the cheaper XDT13Z. Buyers new to the platform must add battery and charger costs, which push total ownership past the bare-tool price. No instrumented professional test of the exact model was found, so treat the performance claims as manufacturer figures.
Which model this is
This is the bare-tool XDT19Z; the XDT19T bundles a 5.0Ah battery and the XDT19R bundles a 2.0Ah battery, while the XDT19Z-R is factory reconditioned. Do not confuse it with the XDT13Z (three-speed, lower torque), the XDT20Z replacement, or the XST01Z oil-impulse driver.
Sources
Manufacturer:
Independent reviews:
- Tool Gear Lab Makita impact driver review
- Tested Power Tools XDT19Z review
- TechReviewer Makita XDT19 overview
Owner reports:
Parts and stores:
